When purchasing a country house, dog owners often think about a separate living space for their beloved pet. Need construction of an aviary also occurs if the owners acquire guard breeds. Benefits aviary content there are a lot of animals: a large service dog will finally be able to perform its security functions without encroaching on the integrity of the beds and flower beds, the problem of wool on carpets and furniture is automatically solved. In addition, the pet can simply be closed in the aviary while receiving guests or the arrival of the repair team.

AT construction of an aviary it is very important to properly insulate the premises, as well as compliance with other nuances, including those related to the presence of a license from Rostekhnadzor. We will tell you in detail about all the stages of building a "dog apartment" and convince you that it is simple and inexpensive!

• Feeder in the aviary

Determine the location of the aviary

Before you make an aviary for a dog, you need to decide on its location. It is undesirable to place it in the far corners of the site - deprived of the opportunity to monitor what is happening near the house, the dog will worry, howl and bark. Do not put it near the fence. Firstly, strangers passing by will disturb your pet, and secondly, a large dog released outside the enclosure can easily jump on it, jump over the fence and run away. It is best to locate your pet's home in the front of the property, not too far from the gate. It is great if the aviary is protected from the winds and hot sunlight by the branches of growing trees or shrubs.

An important parameter that needs to be calculated when building an aviary is its size. He will depend on the size of your pet. There are sectional enclosures for small dogs or puppies with an area of ​​​​1.5 m2. If we are talking about a large dog, the height of which at the withers does not exceed 50 cm, then the minimum size of a comfortable territory for its habitation will be 6 m2. If the dog is larger and its height reaches 50 - 65 cm, then, accordingly, the area of ​​\u200b\u200bthe enclosure will increase to 8 m2. If your pet is even larger, then you should provide him with a space of at least 10 m2. In the event that there is more than one dog in the aviary, then for each additional individual the projected size of the area should increase by 1.5 times. The height of the enclosure should be such that the dog inside can stand freely on its hind legs without hitting the roof with its head.

In the event that a do-it-yourself dog enclosure is designed not as a permanent place of residence, but as a temporary haven for sleeping, then its height may be slightly less.

Construction of a dog kennel

Most often, indoor enclosures with two or three blank walls are equipped for dogs. Open walls are made of metal grating. In order to enter the enclosure, the design provides for an opening door. It is also desirable to have a feeder and a booth. It looks like a traditional do-it-yourself dog enclosure - photo:

Aviary floor - hygienic and warm flooring

The floor should be with low thermal conductivity, waterproof and durable, with a slope from the side walls (partitions) of the paddock to the center and towards the facade. It can be concrete, and preferably asphalt, since the floor of cement is colder, which can lead to rheumatic diseases of the limbs in dogs. In these options, the use of wooden flooring with a minimum area of ​​​​2.0x1.5 m is mandatory.

The walls of the enclosure are an obstacle for a dog who wants to leave it. Within one enclosure, as a rule, there are two types of walls - deaf and lattice. The first type protects dog housing from the wind, and also serves as a support for the roof. Blank walls make out two or three sides of the enclosure. The lattice as a wall is needed to ensure that the dog has a view of everything that happens on the site, as well as for access to sunlight.

It is not recommended to use ordinary nails to fasten the boards of the aviary - the dog can pull them out or get hurt on sharp edges. It is better to use self-tapping screws or screw nails.

As a lattice, some decide to get by with a budget option - a metal mesh. But in fact, the chain-link mesh has more disadvantages than advantages. Firstly, if the dog is large, then sooner or later, the net will tear under its weight. Secondly, there are many real cases when animals injure their teeth on thin metal. Practice has proven that it is best to use a welded fence made of metal rods as a lattice. The optimal lattice step, when keeping large dogs, is 10 cm; for small or medium breeds, a smaller distance must be observed between the bars - about 5 cm.

The design of the lattice includes an entrance door through which you can get into the aviary. Doors are not recommended to be made from the side of blank walls, since when entering the aviary, a person should see a dog, and a dog should see a person. The doors must have a deadbolt and a loop for a padlock.

The roof of the enclosure - protection from precipitation

Most often, the roof of the enclosure is a shed structure made of any roofing material. It can be a metal tile, a soft roof, slate, a professional sheet. The best option can rightfully be considered a soft roof made of bituminous tiles, which both protects the enclosure from precipitation and has high sound insulation.

The slope of the roof is made towards the drainage system so that precipitation does not fall and accumulate under the enclosure flooring.

To improve the lighting of the enclosure, sometimes the roof is not made for its entire area, but for two-thirds. In this case, it is necessary to provide that the dog cannot use the booth as a springboard, from which it is easy to jump out of the enclosure. With this option, special attention must be paid to competent drainage, through which precipitation will flow down the coating in the right direction.

Feeder in the aviary

The feeder is needed to provide the animal with food. It is best to fix it on the bars of the lattice at a height of 20 - 30 cm from the flooring. It is great if the design provides for the presence of a rotary mechanism and a method of fixing it in the closed position. Such a solution will ensure safety when feeding dogs by strangers, for example, in the absence of owners.

In the most remote and protected place of the enclosure, a booth is installed. It is knocked together from tongue-and-groove boards, insulated inside with foam and sheathed with thick plywood. The roof, for ease of cleaning, is better to make removable. This is especially true for dogs with puppies.

It is desirable to make the entrance to the booth in the form of a round opening - this way the internal heat is better preserved. In winter, you can hang a piece of coarse cloth over the entrance that does not prevent the dog from getting inside, but provides the necessary warmth.

Knowing how to build an aviary for a dog, you can start designing it. To do this, you can see what enclosures for dogs are, photos of these structures are presented in large numbers in various magazines and on the Internet. Among such structures, there are real masterpieces that you can try to repeat on your site, creating all the conditions for a comfortable life for your beloved pet.

When operating an aviary and booth, one should adhere to the principle that any product requires care and respect, especially since a living creature lives there.

The above recommendations for the construction of an aviary and a booth, for their operation, are universal. You should correct them taking into account the breed of the dog, climatic and other features of the area where the dog will live. Additional recommendations can be obtained from local dog handlers.

Conclusion: - we hope that the material of the article helped you in solving the issue: How to make an aviary for a dog with your own hands