It produces only high-quality temperature controllers for its boilers. Thanks to unique technologies Protherm automation is very popular among consumers and creates a convenient control of the entire heating system.

The first type is Protherm room regulators. Such devices do not know how to set the temperature for several days in advance, and usually can only control one or two circuits. But they also have huge benefits. These devices are easily connected to the heating system, and take over the temperature control. For example, you mounted, in which the power is many times stronger than necessary. The automation integrated into the device reads the temperature of the water in the system, so while the hot water reaches the radiators, it has time to cool down, and the automation gives a signal to the boiler to turn on. After quickly warming up, heater turns off again. All these switching on and off greatly affect the wear and tear of the boiler, and therefore the entire system. After installing room automation, the heating will not control the temperature of the water in the pipe, but the air temperature in the room, due to the sensor built into the automation. This is of great importance, since the coolant in the pipeline does not cool down for a long time, and the air into the building is slow, thanks to which the equipment is not overloaded and warms up only when it is really necessary.

Another type of regulator is Protherm weather-dependent automatics. In these devices, in addition to the room temperature sensor, there is also an outdoor one. This sensor is mounted on the north side of the house, and the automation adjusts the temperature depending on weather conditions. For example, if it is + 5 degrees outside, there is absolutely no need to heat the water in the system, say up to 70 ° C. The thermostat will independently calculate the desired water temperature, so that the house warms up to the specified value. It turns out that the hot water boiler will not work for wear and tear, and this will significantly save money spent on the heating season.

Weather-dependent Protherm devices can program the system for a week ahead. There are various programming modes such as HOLIDAY mode. The user enters data (date, time, desired temperature ...) and can safely leave the house. Until it is gone, the heating system will warm up to maintain the minimum temperature, only in order not to freeze, and by the time the user returns, the system will heat the dwelling to the set temperature.

Thus, whatever automation is installed, be it weather-dependent or room, it helps the consumer to use the heating system in the most efficient and economical way, prolongs the service life of the equipment and is an integral element of each heating system.

We offer to buy automation for the Protherm boiler in our online store in Moscow. Among the large assortment presented in the catalog, there are always other equipment for home, summer cottage or cottage. By purchasing from us, you will receive the following benefits:

• an individual approach to each client at all stages of cooperation, from assistance in selecting the optimal model to delivery, installation and assistance with warranty service. If you did not find the necessary equipment among the proposed range, we will do our best to satisfy your request;
• delivery of the selected goods safe and sound is carried out within Moscow and the Moscow region within the time agreed with the client. It is also possible to send an order to any region of Russia through a transport company chosen by the client;
• cooperation with leading domestic and foreign manufacturers allows us to offer good prices for the entire range of such equipment as Automation for Protherm boilers;

Automation for Protherm boilers and other products presented in the catalog are provided with a manufacturer's warranty, the period of which varies depending on the brand and model.

http://www.site- a reliable partner you can trust.

DELIVERY | We also offer prompt delivery of your order in Moscow and anywhere in Russia.

We work with leading transport companies.

PAYMENT METHODS

• cash
• cashless payments
• bank cards: VISA, MASTERCARD, WORLD.

Div > .uk-panel")" data-uk-grid-margin="">

Repair of gas boilers

Our experts are ready to repair both the heating equipment itself and the entire system as a whole. All experienced craftsmen have a large store of knowledge necessary to quickly determine a breakdown of any complexity and restore the boiler house to the most short term. During repairs, we use only original factory parts that are covered by the warranty. We have all the necessary spare parts in our warehouse.

Installation of boiler rooms

The masters of our authorized center have extensive experience and special knowledge necessary for the quick and high-quality installation of Protherm boilers of any series in the heating system country house, cottages or production premises. They will also give full advice on all the rules and regulations of operation and carry out commissioning work to ensure the most efficient and economical operation of the installed heating equipment.

Service contract

All Protherm heating equipment requires a seasonal or annual inspection to prevent breakdowns. after-sales service. All service work is carried out by our employees with full responsibility. They will definitely carry out a complete diagnosis of the boilers using special equipment, as well as remove all contaminants from the outer surface and from the inside of the case. The service also includes checking the efficiency of the system.

Protherm room thermostats are devices that regulate the operation of a gas boiler depending on the air temperature in the room. Boilers without a room thermostat turn on and off depending on the temperature of the water in the heating system, boilers with thermostats turn on and off depending on the air temperature in the room.

It must be remembered that the air in the room cools much more slowly than the water in the heating system. With Protherm thermostats, there is no need to manually adjust the temperature, it is enough to set it on the thermostat once. Boilers that do not have a thermostat waste 30% of their energy. So, for example, when the temperature rises by 1C, there is a visible excessive consumption of fuel, despite already tangible discomfort. The effectiveness of the device is obvious.

Protherm room thermostats automatically maintain a comfortable indoor climate. They provide a more gentle operation of the boiler, reducing restart cycles. When using an uninterruptible power supply, the battery life is significantly increased. By purchasing products from Protherm, you save a lot on gas bills.

Room temperature controller wired. It is used in conjunction with heating boilers Protherm Series Skat, and.

• Temperature range: 5°C to 30°C ;
• Output relay: 1 changeover contact;
• Operating voltage: 230 V AC 50/60 Hz;
• Switching current: 10 mA-10(4) A, heating, DC 30 W 10mA-5(2) A, cooling;
• Night temperature: Decrease by 5°C;
• Hysteresis: ~0.5°С;
• Switch: Mains On/Off;
• Indicator: no;
• Protection class: IP 30;
• Special features: no;
• Overall dimensions: 75x75x25.5 mm.

INSTAT PLUS

Room temperature controller for Protherm boilers, Skat (room thermostat).

• Controller connection - Wired
• Room temperature control (8-30°C)
• Programming the maintained temperature for the day (six time intervals)
• Three standard programs
• Frost protection program
• Battery status indicator
• Informing about the boiler operation mode and temperature on the display

Termolink B

Room temperature controller for boilers Protherm,.

• Room temperature controller with eBus.
• Possibility of modulation mode.
• Temperature control Hot water and heating in the room.
• Antifreeze function - protection when the room temperature drops below 3°C.
• Error information on the controller display.
• Correction of the temperature values ​​of the room thermostat and weather-compensated temperature sensor.
• Holiday mode - the highest gas savings.
• Auto-off temperature selection.
• Temperature control from an external weather-dependent temperature sensor - selection of the heating curve (requires additional equipment with an external sensor).

Termolink P

Room temperature controller for wall-mounted boilers Protherm,.

• Room temperature controller
• Heating temperature selection Comfort/Eco
• Vacation mode
• Temporary change in room temperature
• Program for 24 hours or 7 days
• Frost protection

Termolink S

Room temperature controller for Protherm boilers